Benefits of TRITON ABS+CF – Stratasys® Compatible

TRITON ABS+CF

Triton 3D Carbon Fiber ABS was formulated to be 100% compatible with your Stratasys® printers and come with replacement chips but at a fraction of the cost of Stratasys® brand filament. Refill your Stratasys® printer with our alternative to Carbon Fiber ABS. This grade of CF ABS is 100% guaranteed by Triton 3D® to work in your Stratasys® printers.

TRITON ABS+CF is a high-performance carbon fiber reinforced ABS filament ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing. Made using Sabic® MG-94 premium ABS and High-Modulus Carbon Fiber.

We provide the EEPROM chip for your printer (Classic and Plus Style Chip). All you need to do is load your canister, install the chip, and start printing![Canister Loading Instructions]

MADE IN THE USA

We manufacture all of our filaments in our 68,000 ft² manufacturing facility (located in Grand Rapids, Michigan) using state-of-the-art equipment and processes. Our goal continues to be to make the most innovative filaments on the market – targeting difficult end-use applications.

The post TRITON™ ABS+CF – Stratasys® Compatible first appeared on Whole Metals.

Benefits of Triton ABS (BAS) – Stratasys Compatible

Triton 3D ABS/ASA Break Away Support

Triton 3D ABS/ASA Break Away Support was formulated to be 100% compatible with your Stratasys® printers and come with replacement chips but at a fraction of the cost of Stratasys® brand filament. Refill your Stratasys® printer with our alternative to ABS Break Away Support. This grade of ABS BAS is 100% guaranteed by Triton 3D® to work in your Stratasys® printers.

We provide the EEPROM chip for your printer (Classic and Plus Style Chip).  All you need to do is load your canister, install the chip, and start printing! [Canister Loading Instructions]

MADE IN THE USA

We manufacture all of our filaments in our 68,000 ft² manufacturing facility (located in Grand Rapids, Michigan) using state-of-the-art equipment and processes. Our goal continues to be to make the most innovative filaments on the market – targeting difficult end-use applications.

The post Triton ABS (BAS) – Stratasys Compatible first appeared on Whole Metals.

Benefits of TRITON ASA – Stratasys® Compatible

Triton ASA

Triton 3D ASA was formulated to be 100% compatible with your Stratasys® printers and come with replacement chips but at a fraction of the cost of Stratasys® brand filament. Stratasys Compatible ASA refills for are the work-horse materials for the Stratasys® 3D printing industry. This grade of ASA is 100% guaranteed by Triton 3D® to work in your Stratasys® printers.

We provide the EEPROM chip for your printer (Classic and Plus Style Chip). All you need to do is load your canister, install the chip, and start printing![Canister Loading Instructions]

MADE IN THE USA

We manufacture all of our filaments in our 68,000 ft² manufacturing facility (located in Grand Rapids, Michigan) using state-of-the-art equipment and processes. Our goal continues to be to make the most innovative filaments on the market – targeting difficult end-use applications.

The post Triton ABS – Stratasys CompatibleTRITON™ ASA – Stratasys® first appeared on Whole Metals.

Benefits of Triton ABS – Stratasys Compatible

Triton ABS

Triton 3D ABS was formulated to be 100% compatible with your Stratasys® printers and come with replacement chips but at a fraction of the cost of Stratasys® brand filament. Stratasys Compatible ABS refills for are the work-horse materials for the Stratasys® 3D printing industry. This grade of ABS is 100% guaranteed by Triton 3D® to work in your Stratasys® printers.

We provide the EEPROM chip for your printer (Classic and Plus Style Chip). All you need to do is load your canister, install the chip, and start printing![Canister Loading Instructions]

MADE IN THE USA

We manufacture all of our filaments in our 68,000 ft² manufacturing facility (located in Grand Rapids, Michigan) using state-of-the-art equipment and processes. Our goal continues to be to make the most innovative filaments on the market – targeting difficult end-use applications.

The post Triton ABS – Stratasys Compatible first appeared on Whole Metals.

Benefits of Triton ESD-PEI Ultem 1010 – Stratasys Compatible

Triton ESD-PEI Ultem 1010

TriStat ESD Ultem PEI is an advanced ESD-Safe compound designed for use in critical applications that require electrostatic discharge (ESD) protection, high thermal properties, high mechanical properties, and it is inherently flame retardant. Manufactured with consistency in mind using Sabic Ultem PEI resin and then compounded according to a proprietary formulation of carbon additives and process / dispersion modifiers – giving you a filament with excellent printing characteristics and consistent ESD properties.

We provide the EEPROM chip for your printer (Classic and Plus Style Chip).  All you need to do is load your canister, install the chip, and start printing! [Canister Loading Instructions]

MADE IN THE USA

We manufacture all of our filaments in our 68,000 ft² manufacturing facility (located in Grand Rapids, Michigan) using state-of-the-art equipment and processes. Our goal continues to be to make the most innovative filaments on the market – targeting difficult end-use applications.

The post Triton ESD-PEI Ultem 1010 – Stratasys Compatible first appeared on Whole Metals.

Triton 9085 BAS

Triton 3D Ultem 9085 [BAS] was formulated to be 100% compatible with your Stratasys® printers and come with replacement chips but at a fraction of the cost of Stratasys® brand filament. Refill your Stratasys® printer with our alternative to Ultem 9085 BAS. This grade of BAS is 100% guaranteed by Triton 3D® to work in your Stratasys® printers.

We provide the EEPROM chip for your printer (Classic and Plus Style Chip).  All you need to do is load your canister, install the chip, and start printing! [Canister Loading Instructions]

MADE IN THE USA

We manufacture all of our filaments in our 68,000 ft² manufacturing facility (located in Grand Rapids, Michigan) using state-of-the-art equipment and processes. Our goal continues to be to make the most innovative filaments on the market – targeting difficult end-use applications.

The post Triton 9085 BAS – Stratasys Compatible first appeared on Whole Metals.

Triton Ultem 1010 BAS

Our support is 100% compatible with the support used by the OEM for filaments made using ULTEM 1010 PEI.  We offer a 100% satisfaction guarantee – so you can rest assured our support will work in your Fortus®.

We provide the EEPROM chip for your printer (Classic and Plus Style Chip).  All you need to do is load your canister, install the chip, and start printing! [Canister Loading Instructions]

MADE IN THE USA

We manufacture all of our filaments in our 68,000 ft² manufacturing facility (located in Grand Rapids, Michigan) using state-of-the-art equipment and processes. Our goal continues to be to make the most innovative filaments on the market – targeting difficult end-use applications.

The post Triton Ultem 1010 BAS – Stratasys Compatible first appeared on Whole Metals.

Benefits of TRITON PEI 9085 – Stratasys® Compatible

TRITON PEI 9085

Triton 3D Ultem 9085 was formulated to be 100% compatible with your Stratasys® printers and come with replacement chips but at a fraction of the cost of Stratasys® brand filament. Refill your Stratasys® printer with our alternative to Ultem 9085. This grade of Ultem 9085 is 100% guaranteed by Triton 3D® to work in your Stratasys® printers.

We manufacture this ultra-performance 3D printing filament using ULTEM 9085 PEI (polyether imide) resin. PEI is an amorphous, high-performance polymer that combines excellent thermal properties, exceptional dimensional stability, inherent flame retardancy, and good chemical resistance. Filaments made using ULTEM 9085 resin offer the ability to create parts with excellent properties at elevated temperatures due to a high glass transition temperature (Tg) of 185°C. ULTEM 9085 PEI resin is manufactured by Sabic Innovative Polymers and is one of the leading high-performance polymers in the aerospace industry. We use the same ULTEM PEI resin that Stratasys uses – but we charge you less! Certifications available upon request.

We provide the EEPROM chip for your printer (Classic and Plus Style Chip).  All you need to do is load your canister, install the chip, and start printing! [Canister Loading Instructions]

MADE IN THE USA

We manufacture all of our filaments in our 68,000 ft² manufacturing facility (located in Grand Rapids, Michigan) using state-of-the-art equipment and processes. Our goal continues to be to make the most innovative filaments on the market – targeting difficult end-use applications.

The post TRITON™ PEI 9085 – Stratasys® Compatible first appeared on Whole Metals.

Benefits of TRITON PEI 1010 – Stratasys® Compatible

TRITON PEI 1010

TRITON PEI 1010 was formulated to be 100% compatible with your Stratasys® printers and come with replacement chips but at a fraction of the cost of Stratasys® brand filament. Refill your Stratasys® printer with our alternative to Ultem 1010. This grade of Ultem 1010 is 100% guaranteed by Triton 3D® to work in your Stratasys® printers.

We manufacture this ultra-performance 3D printing filament using ULTEM 1010 PEI (polyeth

er imide) resin. PEI is an amorphous, high-performance polymer that combines excellent thermal properties, exceptional dimensional stability, inherent flame retardancy, and good chemical resistance. Filaments made using ULTEM 1010 resin offer the ability to create parts with excellent properties at elevated temperatures due to a high glass transition temperature (Tg) of 217°C. Ultem® 1010 resin is manufactured by Sabic Innovative Polymers and is one of the leading high-performance polymers in the plastics industry. We use the same ULTEM PEI resin that Stratasys uses – but we charge you much less.

Don’t forget to order Stratasys Compatible Ultem 1010 Break Away Support.

We provide the EEPROM chip for your printer (Classic and Plus Style Chip).  All you need to do is load your canister, install the chip, and start printing! [Canister Loading Instructions]

MADE IN THE USA

We manufacture all of our filaments in our 68,000 ft² manufacturing facility (located in Grand Rapids, Michigan) using state-of-the-art equipment and processes. Our goal continues to be to make the most innovative filaments on the market – targeting difficult end-use applications.

The post TRITON™ PEI 1010 – Stratasys® Compatible first appeared on Whole Metals.